|
Post by killerbee20 on Dec 24, 2008 4:51:30 GMT -5
Thought I would show off a bit. We hired an artist that deals with vehicle wraps to whip up a graphic for the Civic. This is a full vehicle wrap, it's printed, and is now finally in hand. Should add some "style" to the upcoming season. Anybody ever install a 3 foot by 14 foot sticker before??? Can't wait to get all that rubber off the sides of the car...*ugh*..
|
|
|
Post by bigtorque on Dec 25, 2008 13:03:01 GMT -5
oh that will be so cool good luck keeping out the bubbles maybe try a lexan body first ha ha
|
|
2WeelTom
Sheep Herder
I could be, that guy!
Posts: 39
|
Post by 2WeelTom on Dec 29, 2008 8:48:26 GMT -5
Now that's going to be nice!
|
|
|
Post by rs4089 on Dec 29, 2008 17:24:39 GMT -5
Yes I have Bob,just use water with a few drops of dish soap in it. You'll be able to reposition it and you'll be able to work out all the bubbles. Wet the car down and spray some of the water/soap on the back of the decal. Start in the middle and squeegee the water out to the edge. Good luck.
|
|
|
Post by rs4089 on Dec 29, 2008 17:27:24 GMT -5
As far as the rubber goes use PPG's DX 330 wax and grease remover. Does a good job and won't hurt your paint.
|
|
|
Post by killerbee20 on Mar 18, 2009 4:55:32 GMT -5
Been waiting for months... All the fiberglass has finally been shipped. Can't wait to get that stuff mounted and painted so we can get that wrap on there.
|
|
|
Post by danwaters on Mar 18, 2009 10:16:30 GMT -5
All it takes is time and money. Nothin to it.
|
|
|
Post by killerbee20 on Mar 18, 2009 15:13:58 GMT -5
and in this case, TIME. ;D
|
|
|
Post by danomt on Mar 18, 2009 15:46:20 GMT -5
Dan W. I was in Bob's shop last Sunday, and to imply that "all" it takes is a true understatement. He has at least 400 projects started and none finished. It is about a half a days work to walk around it all, scratch your head, make a decision and go back to the house.... Dano
|
|